Timeline
2019-05-13:
- 21:25 Ticket #5475 (Backend - Mixed-determined initialization system in Modelica.Electrical.Analog) created by
- Please check …
- 21:18 Ticket #4793 (Backend - Complex division is not working in MSL simulation example) updated by
- This also fixed a numerical initialization failure with …
- 21:05 Ticket #5328 (Run-time - ODE solver behaves erratically in two MultiBody examples with dynamic ...) updated by
-
Summary changed
- 20:46 Ticket #5350 (Run-time - MSL 3.2.3 FFT function does not work correctly) updated by
-
Cc changed
- 20:42 Ticket #5328 (Run-time - ODE solver behaves erratically in two MultiBody examples with dynamic ...) updated by
-
Summary changed
- 20:33 Ticket #5328 (Run-time - ODE solver behaves erratically in two MultiBody examples with dynamic ...) updated by
-
Cc, Priority changed
Replying to sjoelund.se: > #5332 was resolved: how are the … - 19:39 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) closed by
- fixed: Replying to RSchiemann: > So I guess, we can close this …
- 19:02 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) updated by
- To clarify: Both scenarios (1 and 2) outlined above worked as expected.
- 18:35 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
-
Owner changed
@sjoelund.se, can you please re-trigger … - 15:47 Ticket #5444 (OMEdit - Possible bug when drawing polygons in OMEdit (On Windows 10 64 bit build)) updated by
-
Status changed
- 15:04 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- Thanks @sjoelund.se! Please also make sure the fix is pushed to MSL …
- 14:45 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- https://github.com/modelica/ModelicaStandardLibrary/pull/2928 should fix it
- 14:35 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- Should we ask Thomas Beutlich?
- 14:11 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- I tried to merge the sources, but they are a bit broken :D
- 14:03 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- We had a merge of the tables since then, but I don't know if we have …
- 13:54 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- I understand the conclusion of that discussion was that UTF-8 data …
- 13:46 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) updated by
- https://github.com/modelica/ModelicaStandardLibrary/issues/2404
- 13:28 Ticket #5444 (OMEdit - Possible bug when drawing polygons in OMEdit (On Windows 10 64 bit build)) updated by
-
Type changed
- 13:25 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- Lennart, see my …
- 11:04 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- As lennart commented on …
- 08:00 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
-
Cc changed
- 07:00 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) updated by
- Unfortunately, I am not able to reproduce the behavior with simpler …
2019-05-12:
- 18:29 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- OMSI is new experimental things, so I guess they don't work as …
2019-05-11:
- 17:38 Ticket #5409 (OMOptim - can't compile) updated by
- The developers of paradisEO have been contacted. It seems so far the …
2019-05-10:
- 22:32 Ticket #5474 (New Instantiation - [NF] Lookup of inner class fails) updated by
-
Description changed
- 20:15 Ticket #5474 (New Instantiation - [NF] Lookup of inner class fails) created by
- Trying to instantiate the inside model P fails with: […] Script to …
- 19:45 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- One other minor issue that I just wanted to make a note of is that the …
- 19:23 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- That fixed it...mostly. But, not completely: When I try to install …
- 19:08 Ticket #5473 (Third-Party Libraries - AST_BatchPlant test case fails) created by
- The …
- 16:41 Ticket #5471 (OMEdit - OMEdit shows %name instead of the instance name in diagram view) closed by
- fixed: Fixed in 3e23ece/OpenModelica.
- 16:30 Ticket #5472 (OMEdit - Allow to re-simulate a failed simulation) created by
- If a simulation fails, it is not possible to change the solver …
- 16:18 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) updated by
- Thank you for your prompt answer. I will try to reproduce the …
- 16:01 Ticket #4611 (Backend - Processing arrays of records fails) updated by
- Replying to adrpo: > @perost: is this an NF issue? The …
- 15:52 Ticket #4611 (Backend - Processing arrays of records fails) updated by
-
Cc changed
@perost: is this an NF issue? - 15:44 Ticket #5465 (Run-time - Issue with locked-rotor Asynchronous Machine model) updated by
- My example model had one important modification missing. The machine …
- 14:41 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- Should be fixed in …
- 14:39 Ticket #4164 (OMEdit - OMEdit / OMNotebook do not open files at start on OS X) updated by
- My guess is that's because qjson uses cmake instead of qmake like all …
- 14:26 Ticket #4157 (Backend - Problems with complex numbers) updated by
- Thanks Andreas!
- 14:22 Ticket #5462 (Run-time - Inaccurate simulation of systems with noEvent and saturations using ...) updated by
-
Description, Summary changed
In fact you are right, with the current parameter settings, the opAmp … - 14:06 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) updated by
- Does this happen also with other models that you can share?
- 14:02 Ticket #5471 (OMEdit - OMEdit shows %name instead of the instance name in diagram view) updated by
- Happens with all MSL models that are meant to show their name on the icon
- 13:04 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- Has this change been implemented? I'm not sure which header needs to …
- 12:54 Ticket #5471 (OMEdit - OMEdit shows %name instead of the instance name in diagram view) updated by
- Modelica.Blocks.Examples.Filter attached the screenshot from my PC
- 12:50 Ticket #5471 (OMEdit - OMEdit shows %name instead of the instance name in diagram view) updated by
- Any specific model/example?
- 12:37 Ticket #5471 (OMEdit - OMEdit shows %name instead of the instance name in diagram view) created by
- I've upgraded the nightly version today and now OMEdit shows the …
- 11:55 Ticket #5465 (Run-time - Issue with locked-rotor Asynchronous Machine model) updated by
- This seems to work fine both from CLI and OMEdit. Maybe you are using …
- 11:46 Ticket #4157 (Backend - Problems with complex numbers) closed by
- fixed
- 11:30 Ticket #4157 (Backend - Problems with complex numbers) updated by
- Replying to casella: > {{{ > Variables (2) > …
- 11:05 Ticket #5468 (New Instantiation - Lookup issue in ModelicaTest) closed by
- fixed: This was due to a change in the MSL that wasn't propagated to …
- 11:02 Ticket #4157 (Backend - Problems with complex numbers) updated by
-
Owner changed
- 10:29 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) created by
- The model …
- 09:27 Ticket #5469 (*unknown* - OMC cannot read UTF-8 CombiTimeTable data files with BOM) created by
- Please check …
- 09:25 Ticket #4611 (Backend - Processing arrays of records fails) reopened by
- Since this still does not work i reopen it. Somehow the dimension of …
- 09:11 Ticket #5468 (New Instantiation - Lookup issue in ModelicaTest) created by
- Please check …
- 09:07 Ticket #5462 (Run-time - Inaccurate simulation of systems with noEvent and saturations using ...) updated by
- Never mind, I was using the Cpp runtime with the new frontend, not the …
- 09:00 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) updated by
- The above happens although "Evaluate all parameters at compile time" …
- 08:59 Ticket #5139 (Run-time - Initialization failures due to min/max and assert() violations do not ...) updated by
-
Cc, Description changed
- 08:56 Ticket #5139 (Run-time - Initialization failures due to min/max and assert() violations do not ...) updated by
-
Cc, Status, Description, Owner, Summary changed
Widened the scope of the ticket and made it a blocker for 1.14.0, as … - 08:38 Ticket #4603 (New Instantiation - Provide support for start-value selection according to the Modelica ...) updated by
-
Cc, Status, Owner, Milestone changed
Lennart, Karim, Andreas, this is a potentially critical issue for many … - 08:33 Ticket #3882 (New Instantiation - record parameter binding) updated by
-
Priority changed
- 08:32 Ticket #3535 (Interactive Environment - duplicate function names are not detected) updated by
-
Priority, Milestone changed
I tried loading this package: […] in OMEdit. The package is loaded … - 08:15 Ticket #4611 (Backend - Processing arrays of records fails) closed by
- fixed: Marking this as a blocker for 1.14.0, Complex numbers should work in …
- 08:15 Ticket #4835 (*unknown* - Get Complex numbers to work without compromises) updated by
- Issues still open as of 10/05/2019: - #4157 backend issue with …
- 08:11 Ticket #4157 (Backend - Problems with complex numbers) updated by
-
Priority, Milestone changed
Marking this as a blocker for 1.14.0, we should get Complex numbers to … - 08:06 Ticket #2387 (New Instantiation - Operator overloading fails for matrices) updated by
- Issue still present as reported initially, when instantiating …
- 08:03 Ticket #2484 (New Instantiation - Expandable connector resolution misses components) updated by
-
Priority changed
The NF reports: […] - 07:54 Ticket #5467 (*unknown* - Parameter changes before resimulation are ignored if kinsol is used as ...) created by
- I am building a faily large model and found simulation speed to be …
2019-05-09:
- 17:30 Ticket #4157 (Backend - Problems with complex numbers) updated by
-
Cc, Owner, Component changed
When compilingwhen_init_complexwith the NF, the C code … - 16:44 Ticket #4442 (New Instantiation - Incorrect evaluation of inner/outer and record dependencies) updated by
- Still the same issue. Probably a duplicate of #5204
- 15:58 Ticket #5051 (New Instantiation - OM accepts in a model a parameter with no value) updated by
-
Priority changed
- 15:57 Ticket #5202 (New Instantiation - NFCeval.evalBuiltinAbs gets invalid vector input in Buildings model) updated by
-
Priority, Summary changed
- 15:56 Ticket #5241 (New Instantiation - Issue with ExpressionSimplify.evalCat in the NF) updated by
-
Priority changed
- 15:55 Ticket #5243 (New Instantiation - The NF cannot evaluate a structural parameter in a record) updated by
-
Priority changed
Possibly a duplicate of #5204 - 15:53 Ticket #5466 (New Instantiation - The NF does not handle conditional initial equations in sub-components ...) created by
- Please check …
- 15:30 Ticket #5254 (New Instantiation - Issue with constaining class in replaceable array of models) closed by
- fixed: OK, I think we can close this ticket, as the original issue has been …
- 15:27 Ticket #5279 (New Instantiation - NF lookup error in redeclared package) updated by
-
Priority changed
- 15:27 Ticket #5323 (New Instantiation - NFCeval.evalLogicUnaryNot fails to evaluate expression in Buildings model) updated by
-
Priority changed
- 15:26 Ticket #5324 (New Instantiation - Incorrect final detected by NF?) updated by
-
Priority changed
- 14:11 Ticket #5465 (Run-time - Issue with locked-rotor Asynchronous Machine model) updated by
- Btw, instead of locking it down one can provide a extremely slow speed …
- 13:28 Ticket #5465 (Run-time - Issue with locked-rotor Asynchronous Machine model) created by
- I have a very simple test based on an MSL example: […] It's …
- 12:13 Ticket #5462 (Run-time - Inaccurate simulation of systems with noEvent and saturations using ...) updated by
- If im not mistaken, there are no events in this model. When setting …
- 10:07 Ticket #5230 (OMPython - getErrorString raises pyparsing.ParseException after calling ...) updated by
- Hello, I was wondering if there are any news on the topic?
- 09:30 Ticket #5440 (OMEdit - visualization crash) updated by
- It's quite important that the crash is fixed, because OMEdit should …
- 09:29 Ticket #5440 (OMEdit - visualization crash) updated by
- Running with GDB: […] Running without GDB: […] The correct way …
- 07:02 Ticket #5342 (New Instantiation - Issue with Complex array parameter binding in the NF) updated by
-
Priority changed
- 06:58 Ticket #5373 (New Instantiation - Issue with Ceval computing array + scalar Real expression in the NF) updated by
-
Priority changed
- 06:58 Ticket #5464 (New Instantiation - NFScalarize.scalarize fails to evaluate expression in Buildings model) created by
- Please check …
- 06:56 Ticket #5322 (New Instantiation - NFScalarize.scalarize fails to evaluate expression in Buildings model) closed by
- fixed: This issue is now fixed. The model does still not work for another issue.
- 06:50 Ticket #4496 (New Instantiation - Complex 'sum' does not work) updated by
- The flattened model is: […] I guess with the current BE we need the …
- 06:47 Ticket #4496 (New Instantiation - Complex 'sum' does not work) updated by
-
Priority changed
I now get the following error during C compilation […] - 06:43 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) updated by
-
Priority changed
- 06:41 Ticket #5176 (Testing Framework - The CI verification results are broken if the reference result file ...) closed by
- fixed: The issue seems to have been solved in the meantime, possibly because …
- 06:25 Ticket #5321 (New Instantiation - The NF does not handle overconstrained connections correctly) closed by
- fixed: Fixed by PR #3081
2019-05-08:
- 17:35 Ticket #5335 (Backend - Equation order influences the selection of alias variables) closed by
- fixed: Based on the …
- 17:26 Ticket #5463 (OMEdit - Comparing plots while re-simulating) updated by
-
Priority, Status, Component, Owner changed
I endorse this proposal wholeheartedly! - 14:57 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- That test model failing is perfectly understandable and predictable. …
- 14:55 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- So local P is the component P. Has type P dot something, looking for P …
- 14:34 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
-
Well the local P first. So if no
Pcan be found insidetestthen … - 14:32 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- I agree that: […] should not crash OMEdit. As to if we should …
- 14:31 Ticket #5335 (Backend - Equation order influences the selection of alias variables) updated by
- I tried simulating …
- 14:24 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- Replying to dietmarw: > BUT this here should work too: > …
- 14:24 Ticket #5463 (OMEdit - Comparing plots while re-simulating) created by
- It looks like in OMEdit there is no way to compare two plots coming …
- 14:19 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) reopened by
- @perost, any comment?
- 14:17 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to perost: > Seems Hudson is having a bad day …
- 14:17 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to perost: > @casella: I changed …
- 14:05 Ticket #5462 (Run-time - Inaccurate simulation of systems with noEvent and saturations using ...) created by
-
When signal saturations are modelled using
noEvent(), the C … - 13:57 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- @casella Don't confuse conventions with rules. If lowercase instance …
- 13:47 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to adrpo: > @perost: you just need a bigger …
- 13:42 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- @perost: you just need a bigger hammer :) …
- 13:15 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Seems Hudson is having a bad day today, I'll push my changes in later …
- 13:12 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
-
@casella: I changed
NFEvalConstantsso that it's possible to change … - 12:35 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) closed by
- fixed: @dietmarw: case closed? After all, decades-old Modelica style rules …
- 12:30 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- Replying to casella: > Replying to perost: > > …
- 12:18 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- As a further clarification, when doing unit-checking, the NF should …
- 12:14 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
-
Owner, Milestone changed
Replying to perost: > The issue with regards to the NF is … - 12:02 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to perost: > If by possible you mean that it …
- 11:35 Ticket #5030 (OMEdit - Profiling is broken) closed by
- fixed
- 11:34 Ticket #5030 (OMEdit - Profiling is broken) updated by
- Works like a charm. Thanks @adeas31!
- 11:00 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to casella: > OK, now I get it. In equation > …
- 10:55 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
-
Owner changed
Replying to casella: > @perost, can you please comment on … - 10:40 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
-
Component changed
OK, now I get it. In equation {{{ zeros(3) = frame_a.t + frame_b.t + … - 10:27 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
-
Status, Owner changed
- 10:27 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) reopened by
- Replying to dietmarw: > @casella > Allow me to disagree. …
- 05:54 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) updated by
- @casella Allow me to disagree. First having a component "Foo.Bar.Baz" …
- 05:11 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- https://github.com/OpenModelica/OpenModelica/commit/b3569f0d6ee71734591 …
- 05:02 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- Never mind. I didn't have the git repo updated on my Mac. It's a new …
- 04:55 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- @casella: Most probably because unit checking was implemented as a …
2019-05-07:
- 21:10 Ticket #4835 (*unknown* - Get Complex numbers to work without compromises) updated by
- #4793 also now solved.
- 18:49 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) closed by
-
worksforme: @dietmarw, I tried to run this model in OMEdit with
-d=newInst… - 18:44 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to sjoelund.se: > zeros(3) = frame_a.t + …
- 14:20 Ticket #4793 (Backend - Complex division is not working in MSL simulation example) closed by
- fixed: I changed it in …
- 14:05 Ticket #3675 (OMEdit - Add interactive simulation support (e.g., DynamicSelect display)) updated by
- As far as I can tell from playing with this. DynamicSelect for now …
- 13:57 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- Me too: […] Some other port, library, header file getting …
- 13:53 Ticket #5461 (OMEdit - OMEdit crashes(Windows)/does nothing(Linux) when instance has same ...) created by
-
In the attached small package the model
TestGencontains an instance … - 13:40 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- The testsuite fails: […] Which is: […] Which is position*force …
- 13:37 Ticket #5460 (*unknown* - Enhance possibilities to re-simulate) updated by
- Ah, ok. It is very useful to have the chance to change run time …
- 13:36 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- I have: […] And running the same command that fails for you, …
- 13:03 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- I've attached the full log. I just attempted a default install: …
- 12:57 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- I think I need the whole file because I could compile fine with …
- 12:32 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- It still doesn't build. But, it looks like it is a different problem. …
- 12:25 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- Francesco, please also note my comment on …
- 12:09 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- OK. Would you mind triggering the Jenkins job right away when you have …
- 12:06 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Thanks Per!
- 12:02 Ticket #3675 (OMEdit - Add interactive simulation support (e.g., DynamicSelect display)) updated by
- DynamicSelect support is slightly improved in OMEdit in …
- 12:00 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- This is already implemented in the tearing algorithm, but disabled by …
- 11:57 Ticket #5456 (OMEdit - OMEdit lost FMI export and Cpp support) closed by
- fixed: Yes the FMI menu has been removed, you can find the import and export …
- 11:38 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to casella: > @perost, unfortunately Mahder is …
- 11:20 Ticket #5321 (New Instantiation - The NF does not handle overconstrained connections correctly) updated by
- @perost, I checked the 3-phase AC electrical models of the Builings …
- 10:50 Ticket #5030 (OMEdit - Profiling is broken) updated by
- OK, I'll check tomorrow with the new nightly build.
- 10:49 Ticket #5460 (*unknown* - Enhance possibilities to re-simulate) closed by
- invalid: According to the Modelica Specifcation 8.6, If a parameter has a …
- 10:48 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) closed by
- fixed
- 10:34 Ticket #5454 (*unknown* - Make all parameters unchangeable when -d=evaluateAllParameters is set) updated by
-
isValueChangeableshould also be false for structural … - 10:33 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- Replying to ceraolo: > I suspect that in this ticket's …
- 10:27 Ticket #5435 (OMEdit - Resetting OMEdit to default options) updated by
- Yeah, but the GUI should do it :)
- 10:26 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Ah, ok. I was also puzzled as Filip by the fact that OMEdit won't load …
- 10:05 Ticket #5030 (OMEdit - Profiling is broken) updated by
- Should work fine with ee7aaab/OMCompiler.
- 09:22 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
-
Owner changed
@perost, unfortunately Mahder is currently out of the loop, so he … - 08:50 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
-
Status, Owner changed
- 08:48 Ticket #5452 (Backend - Numerical issues due to missing index reduction) reopened by
- 08:42 Ticket #5460 (*unknown* - Enhance possibilities to re-simulate) updated by
-
Description changed
- 08:29 Ticket #5460 (*unknown* - Enhance possibilities to re-simulate) created by
- Consider the following model […] This model does not run under …
- 08:23 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- Replying to ceraolo: > Your initParam works as expected. > …
- 07:55 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- duplicate of #5454
- 07:55 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) closed by
- duplicate:
- 07:51 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- Your initParam works as expected. I suspect that in this ticket's …
- 07:02 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- Could you test this itteration? […] if I understand it …
- 06:47 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
-
Description, Summary changed
- 06:39 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- Well, my report was bad. I'm going to change name and description of …
- 05:56 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- It's now been merged. The job had a random failure yday and didn't merge.
- 05:43 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
- Replying to ceraolo: > In the following model I get …
2019-05-06:
- 22:45 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) created by
- Please consider …
- 22:32 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) created by
- Consider the model …
- 19:28 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- And, openmodelica_1.14.0~dev-5889-g5174acb doesn't build either.
- 18:05 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) updated by
-
Summary changed
- 17:10 Ticket #5457 (*unknown* - Re-simulation does not consider updated value) created by
- Consider the following model […] When run from OMEdit with …
- 16:58 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
-
Milestone changed
Try to get 100% MSL 3.2.3 to work correctly for 1.14.0 - 16:57 Ticket #5452 (Backend - Numerical issues due to missing index reduction) closed by
- fixed: Try to get 100% of MSL to work in 1.14.0
- 16:57 Ticket #5350 (Run-time - MSL 3.2.3 FFT function does not work correctly) updated by
-
Milestone changed
Try to get 100% MSL coverage with 1.14.0 - 16:56 Ticket #5335 (Backend - Equation order influences the selection of alias variables) updated by
-
Milestone changed
- 16:53 Ticket #5288 (*unknown* - Achieve successful simulation of 100% MSL 3.2.3 models with NF) updated by
-
Cc, Status, Owner changed
Status update: as of today there are 30 models of the MSL 3.2.3 that … - 15:23 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- I just tried again (2 hrs after your edit) and it still fails. I'm …
- 14:43 Ticket #5451 (Interactive Environment - OpenModelica.Scripting.system behaving different on Windows and Linux) updated by
-
Priority changed
Okay, I made a workaround for my tests. Should it still be fixed in … - 12:51 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- https://github.com/OpenModelica/OMSimulator/pull/671 might be fixed soon
- 12:48 Ticket #5456 (OMEdit - OMEdit lost FMI export and Cpp support) created by
- My OMEdit, compiled from the current trunc version under Linux, has no …
- 12:32 Ticket #5362 (FMI - modelDescription doesn't include <SourceFile>) closed by
- fixed
- 12:24 Ticket #5421 (FMI - New FMU (OMEdit 1.13.2) failed load from cffi in lisp) updated by
- Do you get those lapack warnings for the attached FMUs? They do not …
- 12:13 Ticket #5446 (OMEdit - Scripting Notifications does not show up after simulation) closed by
- fixed: Fixed in 97cd554/OpenModelica.
- 12:11 Ticket #5435 (OMEdit - Resetting OMEdit to default options) updated by
- Resetting OMEdit settings is as easy as removing the file …
- 12:09 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Yes, saveTotal is not intended to use in OMEdit but rather in …
- 12:07 Ticket #5451 (Interactive Environment - OpenModelica.Scripting.system behaving different on Windows and Linux) updated by
- I believe this is why we pipe the output to files in mos-scripts and …
- 11:56 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- https://github.com/OpenModelica/OMCompiler/pull/3075 - I won't start …
- 11:55 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- […]
- 11:33 Ticket #5444 (OMEdit - Possible bug when drawing polygons in OMEdit (On Windows 10 64 bit build)) updated by
-
Status, Owner changed
- 10:29 Ticket #5400 (Interactive Environment - Moving a model in package breaks other models) updated by
- OK, thanks!
- 10:27 Ticket #5030 (OMEdit - Profiling is broken) updated by
- I also opened …
- 10:10 Ticket #5030 (OMEdit - Profiling is broken) updated by
-
Owner, Component changed
In fact, I get these error messages in the Simulation Output window: … - 10:03 Ticket #5030 (OMEdit - Profiling is broken) updated by
- Do you mean the "Reload" button on the top left corner of the …
- 09:20 Ticket #5400 (Interactive Environment - Moving a model in package breaks other models) closed by
- fixed: Replying to casella: > @perost, can you have a look at …
- 08:27 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
-
Status, Owner changed
- 05:45 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- So that's an OMTLMSimulator issue. @lochel
- 05:43 Ticket #5030 (OMEdit - Profiling is broken) updated by
- Do you press the refresh button after the simulation finishes?
- 05:41 Ticket #3424 (Interactive Environment - Incorrect result with diffModelicaFileListings) updated by
- I don't think I'll be able to have a look this week or next.
Note:
See TracTimeline
for information about the timeline view.
