Timeline
2019-06-06:
- 16:52 Ticket #5519 (OMEdit - OMEdit does not update the graphical annotations of conections when ...) created by
-
Step to reproduce the issue:
1) open the attached
test.momodel … - 16:20 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) closed by
- fixed
- 15:25 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) updated by
- OK, I now see it too. Thanks!
- 13:59 Ticket #5518 (New Instantiation - newInst: Assert with a string parameter and unset default value can't ...) updated by
- The assert is not at all relevant to the issue, the actual problem is …
- 13:40 Ticket #5518 (New Instantiation - newInst: Assert with a string parameter and unset default value can't ...) updated by
- The NF complains […] which sounds ok to me. No value was given to …
- 11:05 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- This should work fine now with 33fb7b9/OpenModelica.
- 11:04 Ticket #1883 (OMEdit - OMEdit has issues when opening files with special chars in them ...) closed by
- fixed: This has been fixed in some recent commits.
- 09:59 Ticket #5518 (New Instantiation - newInst: Assert with a string parameter and unset default value can't ...) created by
- The following model can't be compiled with "-d=newInst" but runs under …
2019-06-05:
- 22:13 Ticket #5409 (OMOptim - can't compile) updated by
- @adrpo, can you add the provided patch to our distro before branching …
- 22:11 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- See the discussion in …
- 19:07 Ticket #5489 (Interactive Environment - Allow setting each and final prefixes via the API) updated by
- I agree that 1.14.0 is not feasible. I would suggest to work on this …
- 13:57 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- Replying to sjoelund.se: > In this case a variable with …
- 12:13 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- I have a comment in the PR as well: …
- 11:59 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- I've been a power system engineer for decades. Over time I got …
- 11:45 Ticket #5409 (OMOptim - can't compile) updated by
- All right, I can confirm that with this modification make works (for …
- 10:38 Ticket #5479 (New Instantiation - OMC accepts invalid equations with conditional components) closed by
- fixed: This was fixed a while ago. The error was changed to a warning since …
- 10:30 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- I have resurrected it. There is an error given for a PowerSystems …
- 08:42 Ticket #5489 (Interactive Environment - Allow setting each and final prefixes via the API) updated by
-
Milestone changed
I think we should target this for 2.0.0 since 1.14.0 is planned for … - 06:13 Ticket #5517 (OMEdit - Clicking arrow-up crashes OMEdit) updated by
-
Description changed
Yes. I'm going to update the ticket's description. It occurs …
2019-06-04:
- 18:42 Ticket #5517 (OMEdit - Clicking arrow-up crashes OMEdit) updated by
-
@ceraolo, are you using
-d=nfAPI? Please do, because it will … - 18:41 Ticket #5454 (*unknown* - Make all parameters unchangeable when -d=evaluateAllParameters is set) updated by
- Thanks Per!
- 18:36 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) closed by
- fixed: After five years, I'm retrying the same experiment that was originally …
- 18:26 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
-
Cc, Status, Owner changed
Lennart, as far as I understand, your … - 18:19 Ticket #5487 (Testing Framework - Add -nfAPI flag to existing API tests in the testsuite) updated by
- Maybe we could just make -nfAPI the default
- 17:43 Ticket #3743 (Interactive Environment - Slowness and error in OMEdit error when resizing) closed by
- fixed
- 17:43 Ticket #3743 (Interactive Environment - Slowness and error in OMEdit error when resizing) updated by
- Yes, it has improved a lot. I see that resizing is now cached, so if …
- 14:45 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) closed by
- fixed: Fixed in 4c6b5ee.
- 14:45 Ticket #5454 (*unknown* - Make all parameters unchangeable when -d=evaluateAllParameters is set) closed by
- fixed: Fixed in 4c6b5ee.
- 14:38 Ticket #5517 (OMEdit - Clicking arrow-up crashes OMEdit) created by
- 1) load Es1a and stAsmaPkg1819 2) open Es1a 3) select diagram (through …
- 14:28 Ticket #5454 (*unknown* - Make all parameters unchangeable when -d=evaluateAllParameters is set) updated by
- Yes, this will also be fixed once I manage to get Jenkins to accept my PR.
- 14:25 Ticket #5454 (*unknown* - Make all parameters unchangeable when -d=evaluateAllParameters is set) updated by
-
Cc changed
@perost, this is possibly related to #5516, could you please have a … - 14:24 Ticket #5347 (Third-Party Libraries - Issues with MSL library handling in Linux) updated by
-
Cc changed
- 14:23 Ticket #5347 (Third-Party Libraries - Issues with MSL library handling in Linux) updated by
-
Summary changed
- 14:22 Ticket #5307 (Build Environment - Update OMDev to include clang and updated QT libraries) updated by
-
Milestone changed
We should do this properly in 2.0.0. Too late for 1.14.0. - 14:22 Ticket #5252 (Backend - Misleading and incomplete output regarding conflicting start and ...) updated by
-
Milestone changed
I guess this will have to wait until 2.0.0 - 14:20 Ticket #4839 (OMEdit - Badly wrong visualization in OMEdit in a simple case) updated by
-
Milestone changed
- 14:20 Ticket #4829 (Installation program - Windows installers fail SmartScreen checks) updated by
-
Milestone changed
- 14:19 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) updated by
- @sjoelund.se, [https://github.com/OpenModelica/OMCompiler/pull/3075 …
- 14:17 Ticket #3743 (Interactive Environment - Slowness and error in OMEdit error when resizing) updated by
- @ceraolo, can you please check this with -nfAPI and close the ticket …
- 14:16 Ticket #3424 (Interactive Environment - Incorrect result with diffModelicaFileListings) updated by
- @sjoelund.se, any chance you can have a look at this before we tag …
- 14:15 Ticket #4835 (*unknown* - Get Complex numbers to work without compromises) updated by
-
Milestone changed
Some of the remaining issues require non-trivial work, rescheduling to … - 14:14 Ticket #5043 (Build Environment - Use clang also on Windows) updated by
-
Milestone changed
Too late to fit this in 1.14.0, rescheduled to 2.0.0 - 14:13 Ticket #5245 (Third-Party Libraries - Trim or possibly remove library patch files) updated by
-
Milestone changed
- 14:11 Ticket #5489 (Interactive Environment - Allow setting each and final prefixes via the API) updated by
- @adeas31, do you think you can fix this in time for the 1.14.0 release?
- 14:10 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- The 1.14.0 beta release date is approaching. Together with faster GUI …
- 14:05 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) updated by
- Replying to lochel: > Now it is reported as verified …
- 12:29 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) closed by
- fixed
- 12:29 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) updated by
- Now it is reported as verified simulation. So I guess the results are …
- 11:05 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
- Fixed in [https://github.com/OpenModelica/OpenModelica/pull/237 PR …
- 09:39 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
- Replying to adeas31: > Replying to perost: > …
- 09:36 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
-
Replying to perost:
> The
tableOnFileparameter is … - 09:31 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
-
The
tableOnFileparameter is defined as structural by the NF, … - 09:14 Ticket #4611 (Backend - Processing arrays of records fails) updated by
-
Milestone changed
- 09:14 Ticket #4611 (Backend - Processing arrays of records fails) updated by
- Replying to ceraolo: > My models using functions creating …
- 07:34 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
-
Description changed
- 07:33 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
-
Priority, Owner, Component, Description, Summary changed
- 07:28 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
- I've checked. tableOnFile (wrongly) appears to be modifiable if you …
2019-06-03:
- 23:40 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) updated by
- See also #2648. Apparently the Inverter model was previously not …
- 23:15 Ticket #4937 (OMEdit - Horizontal lines half-cut when on the top side of the plotting rectangle) updated by
- I see, sorry, I messed up with another ticket @adeas31, why is the …
- 21:45 Ticket #4937 (OMEdit - Horizontal lines half-cut when on the top side of the plotting rectangle) updated by
- Replying to casella: > Those PNGs are just raw screen …
- 21:15 Ticket #4937 (OMEdit - Horizontal lines half-cut when on the top side of the plotting rectangle) updated by
- Those PNGs are just raw screen captures to show what I see on screen.
- 19:20 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
- Replying to adeas31: > It is always a good idea to post …
- 18:12 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
-
It is always a good idea to post the
omeditcommunication.logfile so … - 17:32 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
- Unfortunately not: I've verified that "Evaluate all parameters" is …
- 17:25 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
- I haven't tested it yet but just guessing if this is the same issue as …
- 17:02 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) updated by
-
Owner, Component changed
- 17:01 Ticket #5516 (New Instantiation - tableOnFile parameter of a CombiTable2D appears modifiable when using NF) created by
- Consider the enclosed "Test.mo" along with "Test.TXT" The table output …
- 12:40 Ticket #4003 (Interactive Environment - OMEdit uses wrong modelica:// path) reopened by
- It's still or again not working. On Linux the PowerWorld example is …
- 11:51 Ticket #4937 (OMEdit - Horizontal lines half-cut when on the top side of the plotting rectangle) updated by
- Yes, adding some top and bottom margin should solve also this ticket's …
- 11:42 Ticket #2081 (OMEdit - Conditional connectors not handled by OMEdit) updated by
- See #2132
- 11:42 Ticket #2661 (OMEdit - annotation(Dialog(enable = ...)) is not working correctly) updated by
- See #2132
- 11:42 Ticket #5470 (Run-time - Incorrect assumption of OMC solver on minimum time step should be removed) updated by
- See [https://github.com/OpenModelica/OpenModelica/pull/219 …
- 11:41 Ticket #2132 (Interactive Environment - getComponentAnnotations should evaluate the parameters) updated by
- See #2081, I guess it's basically the same issue
- 11:34 Ticket #5271 (OMPython - Cannot import to Python) closed by
- worksforme
- 11:34 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- @igor, can you please check again and report if the newest nightly …
- 11:24 Ticket #5271 (OMPython - Cannot import to Python) updated by
- You need to set the PATH environment variable or OPENMODELICAHOME to …
- 10:22 Ticket #4937 (OMEdit - Horizontal lines half-cut when on the top side of the plotting rectangle) updated by
- @ceraolo, I just opened #5515, which addresses a significant usability …
- 10:21 Ticket #5515 (OMEdit - Allow for some margin at the top and bottom of plot windows in OMEdit) updated by
-
Cc changed
- 10:18 Ticket #5515 (OMEdit - Allow for some margin at the top and bottom of plot windows in OMEdit) created by
-
Consider the attached simple test case, where
yis a PWM signal … - 07:43 Ticket #5472 (OMEdit - Allow to re-simulate a failed simulation) updated by
-
Status changed
- 07:43 Ticket #5472 (OMEdit - Allow to re-simulate a failed simulation) updated by
-
Version changed
- 07:06 Ticket #5507 (OMEdit - OMEdit crashes when text is written in icon view) updated by
- It works fine on my PC. Connected to OpenModelica …
2019-06-01:
- 23:36 Ticket #4937 (OMEdit - Horizontal lines half-cut when on the top side of the plotting rectangle) updated by
- Has anyone seen the plots in this ticket? I see it is still catalogued …
- 14:23 Ticket #5514 (*unknown* - Keep Modelica-FMU interaction possible) updated by
-
Description changed
- 13:36 Ticket #5514 (*unknown* - Keep Modelica-FMU interaction possible) created by
- If I'm not mistaken, OM simulator (used from OMEdit) does not allow …
- 12:16 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Replying to casella: > > However, this means that every …
2019-05-31:
- 16:26 Ticket #5507 (OMEdit - OMEdit crashes when text is written in icon view) closed by
- fixed: More fixes in: f9fe35/OpenModelica.
- 12:22 Ticket #5513 (OMEdit - OMEdit doesn't correctly insert "each" statement for arrays) closed by
- duplicate: Duplicate of #5405
- 12:20 Ticket #5482 (NF API - Further speed up of NF API) updated by
-
Priority, Milestone changed
I'll mark it as a blocker for 2.0.0. IMHO we have already enough … - 12:19 Ticket #5482 (NF API - Further speed up of NF API) updated by
- OK. If this gets complicated, I would suggest to prioritize the goals …
- 12:17 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- OK. In fact, I understood from @adrpo that the issue of spaces had …
- 11:35 Ticket #5507 (OMEdit - OMEdit crashes when text is written in icon view) updated by
- Should be solved in: …
- 08:34 WikiStart edited by
- (diff)
2019-05-30:
- 17:39 Ticket #5513 (OMEdit - OMEdit doesn't correctly insert "each" statement for arrays) created by
- In a new model, if you insert a …
- 17:34 Ticket #5482 (NF API - Further speed up of NF API) reopened by
- 17:28 Ticket #5512 (New Instantiation - Problem with arrayed parameters in NF) updated by
- Probably related to #5493
- 17:28 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Actually, we do use the NF for getComponents now and *it is slower* …
- 17:27 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
-
Well installing in the proper default place means
Program Files… - 17:23 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- Replying to adeas31: > With the latest changes OMEdit …
- 17:11 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Replying to adrpo: > After using NF for getComponents, we …
- 17:05 Ticket #4494 (Run-time - Incorrect/inconsistent nonlinear solution during simulation) closed by
- fixed: This seems to be working now with OpenModelica …
- 17:02 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Replying to ceraolo: > So, AFAIC, some more attempts to …
- 17:01 Ticket #5512 (New Instantiation - Problem with arrayed parameters in NF) updated by
- Forgot to add that I'm using the new frontend with -d=newInst.
- 16:50 Ticket #5512 (New Instantiation - Problem with arrayed parameters in NF) updated by
- Oops, ignore the second attachment. It is the same as the first. User …
- 16:48 Ticket #5512 (New Instantiation - Problem with arrayed parameters in NF) created by
- The attached model produces the following translation error: […] …
- 13:37 Ticket #5511 (MetaModelica - Investigate MetaModelica to Julia translator) created by
- Things that we need: * A simple (or advanced) source-to-source …
- 13:31 Ticket #5510 (Third-Party Libraries - function can not return or take array) closed by
- invalid: I don't know how it could have worked in v1.11. The fact that it …
- 13:15 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Replying to casella: > It would be good if you (and your …
- 12:05 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Replying to ceraolo: > Just a further addition. > It …
- 12:03 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Replying to ceraolo: > Today with nfAPI on my PC opening …
- 11:44 Ticket #5472 (OMEdit - Allow to re-simulate a failed simulation) updated by
- Replying to casella: > Replying to johti17@…: …
- 11:12 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- With the latest changes OMEdit should work also I have fixed more …
- 10:55 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- Replying to casella: > My Russian student who reported …
- 10:35 Ticket #5510 (Third-Party Libraries - function can not return or take array) created by
- our developed library works well with the v1.11 but now it gives us a …
- 07:21 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- My Russian student who reported the issue says the nightly build works …
- 07:15 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Just a further addition. It looks like Dymola does something similar …
- 07:02 Ticket #5482 (NF API - Further speed up of NF API) updated by
- Today with nfAPI on my PC opening […] takes around 6s, so a 2x …
Note:
See TracTimeline
for information about the timeline view.
